On Wednesday, we arranged to change the current grey resin for the newly arrived cast-able resin. This resin is used a lot for investment based jewelry casting. Because we want to use a similar method, the resin should fit our purpose perfectly. When heating cast-able resin, it will melt out of a mould, leaving space to pour liquid metal. We discussed this method in this post.
Another option is to create silicon moulds from these pieces. Hot, liquid wax can then be poured in the silicon moulds and the resulting wax models will be used for the investment or sand-casting. To make the silicon moulds, both the cast-able and non cast-able resin prints can be used, so in order to compare the two types of prints, we decided to print the same pieces as we did before and make a silicon mould of all four pieces.
First, we had to print the cast-able models, so we had to change the resin in the machine. Because Tessa never changed the resin in the Form2 yet, it was a new process to all of us. Being very cautious to not spil a single drop of resin on the clean glass, we managed to take out the printing platform and replacing the resin tank. Once everything was cleaned and changed correctly, we started our print and the tank started filling with the cast-able resin. Due to the orange cover of the machine, it looked like a black material.
The next day, Thursday, we returned to take out the print. When opening the cover, we were very suprised with the beautiful, bright, blue colour.
After taking out the prints and taking off the support material, we noticed a clear difference with the non cast-able resin. The cast-able material is a lot softer, stickier and can even bend a little. Even though we were very careful taking off the support structure, we could not avoid scratching the surface a little.
Once the pieces were released from the support, we went to the city centre to meet Maaike and discuss the progress.